How to Remove Pet Hair From Faux Fur? 7 Safe Methods

If you have been wondering how to remove pet hair from faux fur, the safest approach is to start with dry, gentle methods rather than immediately washing or heating the garment. Dog and cat hair can get caught between the soft fibers of a faux fur coat or jacket, especially on shaggy textures, faux mink styles and dense synthetic fur. Fortunately, you can remove most pet hair with a lint roller, soft brush, rubber glove or careful hand-cleaning routine without ruining the fluffy pile.

The key is to remove the hair before you wash the garment and avoid treating faux fur like ordinary clothing. Faux fur is commonly made from synthetic fibers, and excessive heat can damage the texture. The Laundress specifically recommends air-drying washable faux fur instead of using a dryer.

Here is how to remove pet hair from faux fur safely and efficiently.

Why Does Pet Hair Stick to Faux Fur?

Pet hair sticks to faux fur because the surface is made from thousands of individual fibers. Unlike a smooth jacket, a shaggy faux fur jacket has a deep pile where short hairs can become trapped.

Static electricity can also make loose hair cling to synthetic materials. This is particularly noticeable with polyester-based faux fur and other synthetic fur materials.

The type of faux fur matters, too.

A short-pile faux fur jacket may release hair relatively easily with a lint roller. A long, shaggy faux fur coat may require a combination of brushing and hand removal. A dense faux mink fur jacket can hold fine cat hair surprisingly well.

Color also changes how noticeable the problem looks. Pet hair can be particularly obvious on a black faux fur jacket, white faux fur jacket or other solid-color outerwear.

How to Remove Pet Hair From Faux Fur: Start With the Easiest Method

Before using water or cleaning products, shake the garment outdoors or over an easy-to-clean surface.

Hold the coat by the shoulders and gently shake it several times. This removes loose hair, dust and surface debris before you start working on the fibers.

Don’t aggressively beat or slap the faux fur. Excessive force can tangle the pile and make the garment look uneven.

Once the loose hair is gone, move to one of the methods below.

1. Use a Lint Roller

A lint roller is usually the easiest answer to how to remove pet hair from faux fur, particularly when the hair is sitting on the surface.

Lay the jacket or coat flat. Roll gently in the same general direction as the fur rather than repeatedly rubbing back and forth.

Work in small sections:

1. Roll over the sleeves.
2. Move across the front panels.
3. Clean the collar and cuffs.
4. Turn the garment over.
5. Repeat on the back.

A lint roller is especially useful for a white faux fur jacket or black faux fur jacket because it lets you see exactly where hair remains.

However, don’t press so hard that the adhesive pulls aggressively on the pile. If the fur is very long or delicate, test a small hidden area first.

2. Try a Clean Rubber Glove

For stubborn pet hair, a clean household rubber glove can be surprisingly effective.

Put on a clean, dry rubber glove and lightly run your hand over the faux fur in one direction. Hair should begin gathering into small clumps that can be picked up by hand.

Veterinary guidance from VCA Hospitals also recommends a clean damp rubber glove as one option for removing pet hair from clothing and upholstery, while noting that different fabrics may require different approaches.

For faux fur, however, don’t soak the glove. The goal is to create enough friction to collect loose hair without saturating the garment.

This method works particularly well when a lint roller cannot reach deep into a shaggy faux fur jacket.

3. Use a Soft Brush

Brushing is one of the most useful long-term habits for faux fur care.

Choose a soft garment brush or another brush appropriate for the pile. Start at the outer ends of the fibers and work gently in the direction the fur naturally lies.

Avoid aggressive back-and-forth brushing.

If you own a vintage faux fur jacket, faux mink fur jacket or a coat with a particularly delicate pile, be even more conservative. Older garments may have weaker backing materials or fibers that have already experienced wear.

The goal isn’t to “scrub” the hair out. You’re separating the pile so loose pet hair can be lifted away.

4. Use Your Fingers for Embedded Hair

Sometimes cat hair or short dog hair becomes tangled deep inside faux fur.

In that situation, your fingers may be safer than a strong brush.

Separate the fur into small sections and gently lift visible hairs from the surface. You can use a lint roller afterward to pick up what remains.

This method takes longer, but it gives you the most control.

It is particularly useful for:

• Long faux fur coats
• Shaggy faux fur jackets
• Faux mink textures
• Hooded faux fur jackets
• Faux fur collars
• Faux fur-trimmed areas

If you notice that the fibers themselves are becoming tangled, stop pulling and switch to gentle brushing.

5. Use a Slightly Damp Microfiber Cloth Carefully

A microfiber cloth can help collect fine surface hair, but this method should be used sparingly.

Lightly dampen the cloth rather than making it wet. Then gently run it across the surface in one direction.

Don’t rub hard.

Don’t soak the faux fur.

Don’t use this as a substitute for washing when the garment actually needs cleaning.

The objective is simply to collect loose hair that remains after brushing.

Always check the garment’s care label before introducing moisture.

6. Vacuum Carefully

A vacuum can help with heavy surface buildup, but the wrong attachment or excessive suction can pull at faux fur fibers.

If you use a vacuum, choose a gentle upholstery-style attachment if available. Keep the suction controlled and avoid repeatedly dragging the nozzle aggressively across the pile.

This can be useful for a large faux fur coat that has accumulated a significant amount of pet hair.

For a small cropped faux fur jacket, however, a lint roller and gentle brush are usually simpler.

7. Finish With a Gentle Fluffing Session

Once you’ve removed the majority of the pet hair, gently shake the garment again.

Then inspect the pile.

If some areas look flattened, use your fingers or a suitable soft brush to separate the fibers. Work in the direction of the original pile.

This final step is important because pet hair removal should not leave your faux fur looking brushed down or uneven.

If the garment is already matted, don’t try to solve everything by brushing harder. Matting is a separate care problem and may require a more controlled restoration process.

Can You Put Faux Fur in the Dryer to Remove Pet Hair?

This is where ordinary laundry advice can become confusing.

Some pet-hair guides recommend putting regular clothing in a dryer on a no-heat setting before washing because tumbling can loosen hair and allow the lint filter to capture it. Maytag, for example, describes a no-heat dryer approach for ordinary pet-hair-covered clothing.

But that does not mean every faux fur garment should go into a dryer.

Faux fur needs more careful treatment. The Laundress advises against putting faux fur in the dryer because heat can warp or melt synthetic fibers.

So if you’re specifically asking how to remove pet hair from faux fur, use manual methods first: shake, lint roll, brush, glove and carefully lift stubborn hairs.

For more detail, see our related guide: Can You Put Faux Fur in the Dryer?

Should You Wash Faux Fur After Removing Pet Hair?

Not necessarily.

Pet hair and dirt are two different problems.

If your faux fur coat has loose hair but is otherwise clean, you may not need to wash it at all. Removing the hair mechanically is often the better first step.

If the garment is dirty, stained or has an odor, check its care label before washing.

Some faux fur can be washed, while others may require professional cleaning. The Laundress recommends machine washing only faux fur garments specifically labeled washable, using a delicate cycle and cold water.

If washing is permitted, remove as much pet hair as possible beforehand.

That keeps excess hair from moving into your washing machine.

For more general cleaning advice, see How to Wash Faux Fur Jacket.

What About a White Faux Fur Jacket?

A white faux fur jacket can make pet hair especially visible.

The temptation is to use stronger cleaning products, but stronger isn’t necessarily better.

Start with dry removal:

Shake → lint roll → gentle brush → inspect → repeat.

If stains are also present, treat the stain according to the garment’s care instructions rather than assuming that bleach or aggressive detergents are safe.

The same principle applies to cream, beige and light-colored faux fur coats.

What About a Black or Dark Faux Fur Jacket?

Dark faux fur tends to show lighter-colored pet hair immediately.

A lint roller is usually the quickest solution for surface hair. For embedded hair, combine a soft brush with careful hand removal.

If you regularly wear a black faux fur jacket around pets, keeping a compact lint roller near your entryway, car or workplace can make maintenance much easier.

How to Prevent Pet Hair From Building Up Again

Learning how to remove pet hair from faux fur solves the immediate problem, but prevention makes the routine much easier.

Try these habits:

Keep the coat away from pet sleeping areas

The less contact your coat has with pet bedding, furniture and blankets, the less hair it collects.

Brush your pet regularly

Regular grooming can reduce the amount of loose hair circulating around your home. VCA Hospitals also recommends controlling pet hair at its source through regular brushing.

Store faux fur properly

Hang the garment in a suitable location rather than leaving it on a couch where your pet regularly sleeps.

Clean before long-term storage

Don’t store a faux fur coat covered in pet hair, dirt or moisture.

Give it a quick lint-roll before wearing

A 30-second cleanup can prevent a much bigger cleaning job later.

Common Mistakes to Avoid

When learning how to remove pet hair from faux fur, avoid these common mistakes:

Using excessive heat: Heat can damage synthetic faux fur.

Scrubbing aggressively: Hard brushing can flatten or tangle the pile.

Wetting the garment immediately: Water isn’t always necessary for pet hair.

Using a harsh adhesive: Extremely aggressive tape can pull at fibers.

Ignoring the care label: The care label should take priority over generic cleaning advice.

Putting a dirty faux fur coat straight into the washer: Remove loose pet hair first.

Using a dryer automatically: Faux fur requires more caution than ordinary clothing.

Does the Type of Faux Fur Matter?

Yes.

A short-pile faux fur jacket and a long shaggy faux fur jacket don’t necessarily respond identically to the same tool.

A dense faux mink fur jacket may benefit from careful section-by-section brushing. A long coat may require more hand removal because hair can become trapped deeper in the pile.

Even a faux fur bomber jacket, faux fur cropped jacket or plus size faux fur jacket can have different textures depending on the construction.

That’s why the safest method is to start with the least aggressive option and increase the level of cleaning only when necessary.

A Simple Pet-Hair Removal Routine

If you want the shortest possible answer to how to remove pet hair from faux fur, use this routine:

Step 1: Shake the garment outdoors.

Step 2: Run a lint roller over the surface.

Step 3: Use a clean rubber glove for stubborn surface hair.

Step 4: Gently brush the pile in its natural direction.

Step 5: Pick out deeply embedded hairs with your fingers.

Step 6: Inspect the collar, cuffs, sleeves and seams.

Step 7: Only wash the garment if it actually needs washing and the care label allows it.

Step 8: Avoid automatically putting faux fur in a heated dryer.

This routine is simple enough to use regularly and gentle enough for many faux fur garments when the care label permits these methods.

Faux Fur World: Affordable Faux Fur for Everyday Winter Style

At Faux Fur World, our focus is faux fur outerwear that combines winter style with practical everyday wear.

We position Faux Fur World as the most affordable option in the premium faux fur market as a brand claim, while giving shoppers access to styles such as faux fur coats and jackets for different outfits and occasions.

If you’re shopping for a new faux fur jacket after dealing with constant pet hair on an older garment, consider the texture, length, color and care requirements before choosing your next piece.

A white faux fur jacket creates a completely different look from a black or brown jacket, while a cropped faux fur jacket works differently from a long winter coat.

The right choice isn’t simply about appearance. Think about how often you’ll wear it, where you’ll store it and how much maintenance you’re realistically willing to do.

Final Answer: How to Remove Pet Hair From Faux Fur?

The safest answer to how to remove pet hair from faux fur is to begin without water or heat.

Shake the garment, use a lint roller, collect stubborn hair with a clean rubber glove, gently brush the pile and remove deeply embedded hairs by hand. If the garment actually needs washing, follow its care label rather than assuming ordinary laundry rules apply.

Most importantly, don’t use a heated dryer simply because a dryer can help remove pet hair from some ordinary clothes. Faux fur is different, and excessive heat can damage synthetic fibers.

With a few minutes of regular maintenance, your faux fur coat or jacket can stay cleaner, softer and more presentable without aggressive cleaning.

Frequently Asked Questions